Buffalo TeraStation 5010 User Manual Download Page 127

Page: 127 / 176

126

Enable "Share Link to Logs".

Click

Browse

and select the shared folder where the link will be created in "Target Shared Folder". Click

Click

Under the selected shared folder, a folder named "system_log" will now contain the logs.

Updating the Firmware

If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware
either manually or automatically.

Notes:

• If all drives and RAID arrays on the TeraStation have LVM enabled but no LVM volumes have been created, you

will not able to update the firmware from Settings.

• Settings is not available while the firmware is updating. Don't try to access Settings from another computer

until the update is complete.

Updating Manually

In Settings, click

Management

Click

to the right of "Update".

Click

Install Update

You can also download the latest firmware from the Buffalo website.

Summary of Contents for TeraStation 5010

















































































































































































Search results

Summary of Contents for TeraStation 5010

Reviews:

Related manuals for TeraStation 5010

Brands by name

Popular brands

Buffalo TeraStation 5010, User Manual

Search results

Summary of Contents for TeraStation 5010

Reviews:

Related manuals for TeraStation 5010

Brands by name

Popular brands