manualshive.com logo in svg

Buffalo TeraStation 5010 TS51210RH, User Manual, Page: 46 / 211

Share
Download
Buffalo TeraStation 5010 TS51210RH User Manual Download Page 46

RAID 0

Combines 2 or more drives into a single array. The usable drive space is the total space of all drives used. This simple 
RAID mode offers faster performance than RAID modes that include parity. If a single drive in the array fails, then all 
data in the array is lost.

JBOD

This mode uses the drives inside the TeraStation as individual drives. The drive space you can use is the total 
capacity of all drives in the TeraStation. If any drive is damaged, then the data on that drive is lost.

Working with RAID Arrays

To change RAID settings, navigate to 

Storage

 - 

RAID

 in Settings.

Using JBOD

With JBOD, each drive in the TeraStation is addressed separately. To put drives from an array into JBOD, follow the 
procedure below.

1 

In Settings, click 

Storage

.

2 

Click 

 to the right of "RAID".

3 

Click the array to delete.

4 

Click 

Delete RAID Array

.

5 

The "Confirm Operation" screen will open. Enter the confirmation number, then click 

OK

.

6 

Click 

OK

 when finished.

Once JBOD is configured, create shared folders on each drive to use them.

45

Summary of Contents for TeraStation 5010 TS51210RH




















































































































































































































Reviews:

No comments