Buffalo TeraStation 3010, User Manual

Page: 91 / 229

90
Chapter 5 Backup
2
Click the settings icon ( ) to the right of “rsync”.
3
Enter this TeraStation’s admin password into the “Password” field and click OK .
Note: If you want to encrypt the rsync access, enable rsync over SSH.
4
Move the rsync switch to the position to enable rsync.
Restoring Backup Data
The procedure for restoring backup data varies depending on the backup mode. Refer to the following subsection
corresponding to the backup mode you have used for backup. When restoring backup data, make sure you have
enough available space on the TeraStation to accommodate the backup data, otherwise the restore process will fail.
Full and Management Backups
Copy and paste the backed up files from the backup destination folder to a folder which you want to restore.
Overwrite Backups (Incremental and Differential)
Files and folders have already been stored on the desired destination. You can access them by switching the
operation to the backup destination TeraStation. Alternatively, you can restore any files or folders by creating a
backup job and configuring the backup destination as a backup source and selecting the same backup mode for
the “Operation Mode” drop-down list. Please do not use the same folder as the backup destination to restore backup
data from multiple backup sources, as this may cause the restored data to get overwritten.