Buffalo TeraStation 3010, User Manual

Page: 172 / 229

171
Chapter 7 Advanced Features
6
Click Save .
7
Connect the hub’s LAN port and TeraStation’s LAN port using the second LAN cable. If you are using an
intelligent switch, connect to the LAN port that was previously configured for port trunking.
8
Restart the TeraStation by pressing and holding down the power button for three seconds to power off the
TeraStation, then press the power button again to turn the TeraStation on.
Notes:
• If you configure port trunking, make sure to restart the TeraStation after settings are saved. Otherwise, the
connection may become unstable.
• If you have selected dynamic link aggregation for the port trunking mode on the TS3020 series TeraStations,
the link speed for LAN port 2 will be limited to up to 1000 Mbps. Disable the auto negotiation settings on the
connected intelligent switch.
• If you have selected a port trunking mode other than dynamic link aggregation on the TS3020 series TeraStations,
the port with the faster link speed will be used for access. You can check the link speed of each port from the
Dashboard in Settings.
Offline Files for Windows
The “offline files” feature that is included with many versions of Windows can be used with files on the TeraStation.
You will be able to work on files stored on the TeraStation even when your PC is disconnected from the network.
When you next connect to the network, the updated files are written and synchronized. Follow the procedure below
to configure offline files.
1
From Settings, click File Sharing .
2
Click the settings icon ( ) to the right of “Folder Setup”.
3
Click the shared folder for offline files.
4
Choose either “Manual caching of documents”, “Automatic caching of documents”, or “Automatic caching of
programs and documents” on the
Option 1 tab, then click OK .
Manual caching of documents : User selects files that are cached.
Automatic caching of documents
: Opened files can be cached locally for offline use. Previous versions of files
that are not synchronized are automatically replaced by the latest versions.
Automatic caching of programs and documents
: Opened files can be cached locally for use offline. Previous
versions of files and applications executed on the network that are not synchronized are automatically
replaced by the latest version of the files and applications.