Buffalo LinkStation 500 User Manual Download | Manualshive

Page: 37 / 139

background image

Chapter 5 Disk Manager

Disk Manager is an application that manages RAID arrays and internal or external drives. To open Disk Manager, click
the icon on the home screen.

RAID Modes

The LinkStation supports many types of RAID. The type of RAID arrays available for use depends on how many drives
are installed on your LinkStation.

RAID 1

Combines two drives into a mirrored array. The usable space is equal to the capacity of a single drive. Identical data
is written to each drive. If a drive becomes damaged, data can be recovered by replacing the damaged drive. As long
as one drive in the array remains undamaged, all data in the array can be recovered.

RAID 0

Combines two drives into a single array. The usable space is equal to the total capacity of all drives in the array.
This simple RAID mode offers faster performance than RAID modes that include parity. If a single drive in the array
becomes damaged, then all data in the array will be lost.

Linear

Combines all drives from drives into a single virtual drive. For this virtual drive, data will be written onto the first
drive, then to the next drive when the first drive becomes full, and so on. The usable space is equal to the total
capacity of all drives in the array. Linear mode offers no redundancy. If any of the drives become damaged, then all
data on that drive will be lost.

JBOD

This mode uses the drives inside the LinkStation as individual drives. The usable space is equal to the total capacity
of all drives on the LinkStation. If any of the drives become damaged, then all data on that drive will be lost.

Working with RAID Arrays

Note:

If you change the RAID mode, all data on the array is deleted. This is true for every procedure in this chapter.

Always back up any important data before performing actions that affect your RAID array.

Using JBOD

With JBOD, each drive on the LinkStation is addressed separately. To put drives from an array into JBOD, follow the
procedure below.

1

From Settings, click

Disk Manager

( ).

36

Chapter 5 Disk Manager

«
...
35
36
37
38
39
...
»

Summary of Contents for LinkStation 500












































































































































Reviews:

No comments

Related manuals for LinkStation 500

Brand: Makita Pages: 2

Brand: CSS Pages: 2

BroadLink SP3353

Brand: MicroNet Pages: 66

Brand: EnGenius Pages: 3

Brand: Idis Pages: 31

Brand: Marani Pages: 39

Brand: HighPoint Pages: 10

Brand: Rainbow Pages: 2

EtherLink 3C905C-TX

Brand: 3Com Pages: 96

Brand: Intercoax Pages: 2

Brand: NETGEAR Pages: 152

Brand: Edimax Pages: 15

Brand: Alcatel Pages: 4

Brand: BinTec Pages: 2

Brand: Robotis Pages: 10

Brand: ZyXEL Communications Pages: 645

Brand: MESA Electronic Pages: 27

Brand: N-Tron Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands