5
Select the shared folder that you want to make available to iTunes, then click
OK
.
6
Click
OK
.
7
Move the iTunes server switch to the
position to enable iTunes server.
Connecting a Printer
You can connect a printer to the USB port on the LinkStation.
Notes:
• Only one USB printer can be connected to the LinkStation.
• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status information is
not supported.
• Don’t disable the SMB protocol while the print server is enabled. If you do, you will need to enable SMB again and
reconfigure the print server from scratch.
1
Connect a printer to the LinkStation’s USB port, then turn the printer on.
2
From Advanced Settings, click
Services
.
3
Move the print server switch to the
position to enable the print server.
4
Refer to the manual supplied with the printer and install the printer drivers.
72
Chapter 7 Multimedia
Summary of Contents for LinkStation 200B
