manualshive.com logo in svg

Buffalo AirStation WLA-L11G, User Manual, Page: 7 / 68

Share
Download
Buffalo AirStation WLA-L11G User Manual Download Page 7

WLA-L11 User’s Manual

5

The AirStation settings are preformed using a personal computer on the Ethernet LAN. For the proper
AirStation setting, make sure that the following software are installed in the personal computer (hereafter
called the settings personal computer) on the Ethernet LAN.

TCP/IP protocol . . . . . . Refer to the TCP/IP Protocol Setting.
AirStation manager. . . . Refer to Installing the AirStation Manager.
Web browser (Microsoft Internet Explorer version 4.0 or later, or Netscape Navigator 3.0 or later): 

Refer to the relevant Web browser manual. Microsoft Internet Explorer is installed
as standard on Windows 98 and Windows 2000.

TCP/IP Protocol Setting

The procedure for setting the proper TCP/IP protocol is depending on the OS used in the PC. Please refer to
the following for the proper settings.

 Before the setting, check the LAN port drivers are properly installed in the personal com-

puter and it is connected to the network.

Windows 98/95:

Refer to 

Windows 98/95

 below.

Windows 2000:

Refer to 

Windows 2000

 below.

Windows NT 4.0:

Refer to 

Windows NT

 4.0 below.

Windows 98/95

The TCP/IP protocol is set as follows.

Preparing the AirStation Settings 

(on the Personal Computer)

1

Start your personal computer.

2

Click the 

Start

 button, and then select 

Settings

, and then 

Control Panel

.

3

Double-click the 

Network

 icon.

4

In the Network dialog box, check that 

TCP/IP

 is displayed in the following 

net-

work components are installed

: field.

Only 1 LAN board installed

The dial-up adapter and the LAN boards

are installed.

TCP/IP (LAN board driver name) is normally dis-

played in The following network components are

installed: field.

[TCP/IP-> "LAN board driver name"]

If no TCP/IP is displayed, refer to 

the

 

Adding TCP/IP Protocols (Windows 98/95)

section

 (Page 7)

.

Summary of Contents for AirStation WLA-L11G





































































Reviews:

No comments