Buffalo AirStation WBR2-G54S User Manual Download Page 6

Page: 6 / 95

• Additional SPI Firewall Functions - DMZ, intrusion detection and notiﬁ cation

• Syslog transmits some or all system activities to a central Syslog server.

• Extended range, with optional add-on antennas or WDS (Wireless Distribution System).

• Auto Media Dependent Interface/Crossover (MDI/X) port, allows connection by standard and

crossover CAT5 cables.

• Supports Universal Plug and Play (UPnP).

• Buffalo’s AOSS System for easy, secure wireless client conﬁ guration.

• Enhanced security features:

- SPI Firewall and DMZ zone functions to prevent unknown intruders.

- Intrusion Detector Firewall (NAT) with a pop-up or email alert warning unwanted attacks.

- Dynamic packet ﬁ ltering.

- WPA, 802.1x, TKIP, AES, and WEP.

- VPN (IPSec, PPTP and L2TP) pass-through

- Packet monitoring and ﬁ ltering by MAC address, IP address and port.

- PPPoE support

- WDS support

• Buffalo’s easy web interface conﬁ guration

• Broadband router static and dynamic routing methods between WAN and LAN based on updated

routing tables. An economical way to bridge multiple networks.

Introduction

Summary of Contents for AirStation WBR2-G54S
































































































Search results

Summary of Contents for AirStation WBR2-G54S

Reviews:

Related manuals for AirStation WBR2-G54S

Brands by name

Popular brands

Buffalo AirStation WBR2-G54S, User Manual

Search results

Summary of Contents for AirStation WBR2-G54S

Reviews:

Related manuals for AirStation WBR2-G54S

Brands by name

Popular brands