Buffalo Tools AWELD160 Assembly & Operating Instructions Download

Page: 1 / 10

AWELD160 ARC Welder Assembly & Operating Instructions

AWELD160

ARC Welder w/Thermal Overload

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE
RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call our customer help line at

1-888-287-6981

, Monday-Friday, 8 AM - 4 PM Central Time

. A copy of the sales

receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Summary of Contents for AWELD160











Search results

Summary of Contents for AWELD160

Reviews:

Related manuals for AWELD160

Brands by name

Popular brands

Buffalo Tools AWELD160, Assembly & Operating Instructions

Search results

Summary of Contents for AWELD160

Reviews:

Related manuals for AWELD160

Brands by name

Popular brands