6
Fitting the mounting bracket
SKR6.1R, SKR12.1R - Subject to technical modifications.
18
6.5
Installing mounting brackets on
slate roofs
B
Depending on the distances determined (
Æ
page 14),
remove sufficient slates in the area of the rafters.
B
Position the mounting bracket:
– The mounting bracket must be installed directly
above the slate below it without touching this panel.
B
Mark the mounting bracket positions on the roof.
B
Screw mounting bracket [2] with 3 screws 8 x 120 mm
[1] onto the rafter. Use a SW13 spanner.
B
Re-install slates.
Fig. 24 Mounting brackets for slate shingle roofs
1
Screws 8 x 120 mm
2
Mounting bracket
NOTICE:
To avoid roof leaks on slate or
shingle roofs, consult a roofer for advice and
assistance.
B
A competent person must carry out the
installation.
B
Because the mounting bracket can rest on
the panel below, this panel must be
reinforced on-site using a suitable
material.
6720646203-17.1ST
1
2
13
6
