Installation
3
11
We reserve the right to make any changes due to technical modifications.
Installation and service instructions RC20 room controller • Issue 08/2006
The mounting surface must be level so that the mounting plate is
not distorted when the screws are tightened.
z
Drill two holes in the wall at the required position; use the
mounting plate as a template (Fig. 3).
z
Insert the supplied wall plugs into the drilled holes
(Fig. 3,
Item 1
).
z
Fix the mounting plate using the screws supplied
(Fig. 3,
Item 2
).
Fig. 3
Fixing the mounting plate to the wall surface
Item 1:
Hole drilled in the wall
Item 2:
Screws supplied for installation on plastered walls
Item 3:
Vertical fixing holes for installation on a flush-mounted box
Item 4:
Horizontal fixing holes for installation on a flush-mounted box
1
2
3
4
3
4
1
2
6304 5126-01.0K
USER NOTE
When fitting to a flush-mounted box, use the vertical or horizontal
fixing holes (Fig. 3,
Item 3
or
Item 4
).
