Product description
3
5
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logalux ST400/3, 500/3, 750/3 and 1000/3 "US" • Issue 07/2005
3
Product description
The Logalux ST400/3 – 1000/3 DHW tanks are mounted
on a pallet at the factory. Covers and accessories are in
a separate carton package.
The main components of the DHW tank are:
–
DHW tank (Fig. 1,
Item 5
) with corrosion protection.
The cathodic corrosion protection is the hygienic
DUOCLEAN MKT thermo-glazing from Buderus and
the magnesium anode mounted on the top access
port (Fig. 2,
Item 1
).
–
Tank jacket
The removable cover components are the lid (Fig. 1,
Item 1
), the access port cover (Fig. 1,
Item 8
), the
two-piece cover strip (Fig. 1,
Item 6
) at the front and
the three-piece cover strip at the back (Fig. 1,
Item 3
).
–
Thermal insulation jacketing (Fig. 1,
Item 4
)
The thermal insulation mat is flexible foam with an
outer cover of plastic.
–
Top and bottom thermal insulation (Fig. 1,
Item 2
)
–
Front thermal insulating disk (access port) (Fig. 1,
Item 7
)
–
Front access port (Fig. 1,
Item 9
)
The manual access cover is an opening for
maintenance inspection and cleaning.
–
Sensor well for installation of a DHW temperature
sensor (Fig. 2, page 6,
M
)
The boiler DHW thermostat regulates the set DHW
temperature using this DHW temperature sensor
(port).
–
Coiled heat exchanger
The coil type heat exchanger (Fig. 2,
Item 3
, page 6)
transfers the energy from the heating water to the
DHW inside the tank. The tank content is evenly
heated through.
Fig. 1
Logalux ST400/3 –1000/3 DHW tank
Item 1:
Tank cover
Item 2:
Thermal insulation disks
Item 3:
Back cover strips
Item 4:
Thermal insulation jacket
Item 5:
DHW tank
Item 6:
Front cover strip
Item 7:
Access port in thermal insulation
Item 8:
Access port cover
Item 9:
Front access tank hand hole
3
4
2
6
1
2
3
3
3
3
6
8
7
5
9
9