Buderus Logalux LTD950, Installation Instructions For Contractors

Page: 14 / 24

5 Fitting
Logalux LTN/LTD/LTH/LF 400...3000 – 6 720 818 806 (2015/12) 14
5.4.1 Fitting thermal insulation to the back panel
The thermal insulation is shown fitted to a single cylinder.
▶ Remove the fabric plugs from the hole devices in the back panel.
Fig. 11 Removing the fabric plugs from the hole devices
▶ Lay the thermal insulation sections for the back panel onto the back
panel.
Fig. 12 Fitting the thermal insulation sections for the back panel
▶ Lay the bottom/back thermal insulation section

( Fig. 10, [1],
page 13) under the cylinder and insert the slits into the cylinder feet.
Fig. 13 Laying the thermal insulation section under the cylinder
▶ Push the top/back thermal insulation section (

Fig. 10, [2],
page 13) against the bottom section, so that the bottom hook locking
bracket latches into place.
Fig. 14 Push the top thermal insulation section against the bottom
thermal insulation section
▶ If required, attach the assembly aids.
Fig. 15 Attaching the assembly aids
▶ Wind the joined thermal insulation sections around the cylinder.
Fig. 16 Winding the thermal insulation around the cylinder
6 720 817 906-18.1T
6 720 817 906-16.1T
6 720 817 906-07.1T
6 720 817 906-19.1T
6 720 817 906-21.1T
6 720 817 906-20.1T