BUCKINGHAM MFG.
INSTRUCTIONS FOR THE BUCKINGHAM
ROOF TOP TEMPORARY FALL PROTECTION KIT
Model # 3111 & 3111G
PURPOSE : The roof top temporary fall protection kit is designed to fall protect persons installing roof-top
equipment. This kit is not intended to be used as a restraint system.
USE REQUIREMENTS : This kit is intended for use when working on sloped roofs and when working within
10 feet of the edge of flat roofs.
COMPONENTS :
Model 3111
Full body harness - model U6393600 (refer to instructions in kit on proper fit and
adjustment of a harness)
Deceleration Lanyard
–
BuckStop model 5V+5113H (
3’
overall length lanyard with a rope
grab at one end and locking rope snap on opposite end.)
100 feet of
5/8”
diameter Multiline rope
–
model 7+K+K4A1100 (captive eye carabiners
spliced at each end).
Carry bag - model 45400R2-18
Throw Bag Kit
–
model 16-16R-150 (16 oz. Th
row bag with 150’ of Slickline)
Throw Line Bag
–
model 4560
Model 3111G
Full body harness - model U6393600 (refer to instructions in kit on proper fit and
adjustment of a harness)
Deceleration Lanyard
–
BuckStop model 5V+5114M (4' web lanyard stitched to a rope
ascender at one end and locking rope snap on opposite end.)
100 feet of 1/2”
diameter Multiline rope
–
model 74V41100
(locking rope snap one end, 4”
length spliced eye on the opposite end.)
Carry bag - model 45400R2-18
Throw Bag Kit
–
model 16-16R-
150 (16 oz. Throw bag with 150’ of
Slickline)
1. Throw Line Preparation
Remove throw line from packaging and secure
one end to a stationary object. With a gloved
hand, firmly grasp throw line at secured end and
pull entire length, removing all kinks and knots.
This will ensure your line does not get tangled
when throwing your weight.
OVER
3111.doc (Rev. 12-19-16)
P/N 230198
