7101 Presidents Dr. Suite 110, Orlando, Fl. 32809
Phone: 800-330-2825 www.apbuck.com Fax: 407-851-8910
PRODUCT
DESCRIPTION
APB-706000
BUCK BioAire™
Pump Model B520, complete with standard 120 VAC adapter/charger, instruction
manual, and APB-706100 Calibration Rotameter Assy.
APB-706020
BUCK BioAire™
Pump Model B520, complete with standard 230 VAC adapter/charger, instruction
manual, and APB-706100 Calibration Rotameter Assy.
APB-706010
BUCK BioAire™
Model B520 Pump only, with instruction manual
APB-601900 FastOne
™
Charger, 100-240VAC, provides one-hour battery charge, optional
APB-108010
Standard Charger, 120VAC
APB-108012
Standard Charger, 230 VAC
APB-109056
AC Power Supply, 120/230 VAC, CE, UL, CSA, GS/TUV, for continuous operation from AC
APB-706100
Calibration Rotameter Assembly, fits onto top of bioaerosol cassette
APB-109132
Vinyl sample tubing, ½” OD, 10 ft., for remote sampling with bioaerosol cassette
TechBrief
T200-705
BUCK BioAire™
Model B520
The
BUCK BioAire™
Model B520 Bioaerosol Sampling Pump is a compact, lightweight 5-20 LPM controlled
flow sampling pump for bioaerosol sampling with Allergenco-D and
Air-O-Cell®
cassettes. The easy, full-
control keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy
calibrations without tools, or perform manual timed sampling at the touch of a button. A group of status
LEDs show the
BUCK BioAire™
Model B520 operation at a glance. Both an LED and audible alarm pro-
vide confirmation of end-of-sample or depleted battery. The
BUCK BioAire™
Model B520 Pump provides
a full five hours of continuous operation (at 15 LPM) from its rechargeable NiCad batteries. It comes with
a standard charger; an optional
FastOne™
one-hour charger provides the ultimate in power management
and time savings.
*Air-O-Cell is a trademark of Zefon International
Continuous Sampling for
Screening Airborne Aerosols
•
Small, lightweight, compact
•
Accepts Allergenco-D and
Air-O-Cell
®
Cassettes
•
Battery powered, recharge or
operate with standard charger/
adapter or optional FastOne
™
charger (provides one-hour
charging)
•
Five hour* run time at 15 LPM
•
Convenient timer for 1, 2, 5, 10
minute samples and
Continuous Mode
•
End-of-cycle audible & visual
•
Easy keypad calibration without
tools
*Depends on battery maintenance, backpressure,
etc.
Controlled Flow Sampling Pump
for Bioaerosols
Rev. 05/27/2010
