background image

8

2 Safety

BÜCHI

 Vac 

V-500/V-501/V-502/V-503

2.7

Safety Measures

Protective clothing such as 

goggles 

and 

laboratory coats

must be worn during operation of the device.

These operating instructions must be available at all times
to operating personnel at the place of operation of the device
and should be regarded as an integral part of the Büchi
Vac V-500-503. Instructions in other languages, which may
be ordered separately, must also be kept with the device.

Modifications

Modifications of the device or of spare parts or of
accessories as well as the use of spare parts or accessories
other than those mentioned in these operating instructions
is allowed only with the prior written permission of BÜCHI
Labortechnik AG.

Responsibility for the operator

The operator is responsible for the instruction of his
personnel. Copies of these operating instructions in various
languages can be ordered for this purpose.

The operator shall inform the manufacturer without delay of
any safety-related events which might occur during operation
of the device.
Regional and local statutes and regulations must be observed.

It is forbidden for anyone other than authorized maintenance
personnel to remove the front or back plate using standard
tools. Damaged glass equipment may not be used under
vacuum conditions.

Touching any parts of the device carrying electrical current
can result in fatal injury!

Summary of Contents for Vac V-500

































Reviews: