6 Operation
31
K-425 / K-436
Operation Manual, Version B
*CL
ICK
*
5
6
To Scrubber or
water jet pump
Example with two glass
caps installed!
• Check for proper and
tight seating of each rubber sealing
5
.
➥
If necessary unlock the handles again and readjust the suction module!
• Plug the suction hose with plug onto the suction module
6
.
➥
The plug catches with a noticable *click* sound.
• If applicable, follow the previous steps to install a suction module on a second rack.
• Switch on the Scrubber or water jet pump and activate the fume hood ventilation.
➡
The rack(s) can now safely be processed in the SpeedDigester.
Note
• Clean all glass parts before mounting to avoid cross contamination.
• When a water jet pump is used, hazardous vapours can escape into the environmental air if the
suction is inadequate.
• If a Scrubber without condensation step is used, the condensate that accrues must be absorbed
by means of a Woulff bottle between the SpeedDigester K-425 / K-436 and the Scrubber.
• When operating with 3rd party sample tubes no insulation caps and glass caps are available. In
this case, all positions must be equipped with samples!
Summary of Contents for SpeedDigester K-425
Page 1: ...K 425 K 436 SpeedDigester Operation Manual 11593346B en...
Page 56: ......
Page 57: ......
