Büchi Labortechnik AG
Safety | 2
Operation Manual Sepiatec SFC-250
9/62
2.7.1
Faults during operation
If an instrument is damaged, sharp edges, glass splinters, moving parts or exposed
electrical wires can cause injuries.
u
Regularly check instruments for visible damage.
u
If faults occur, switch off the instrument immediately, unplug the power cord and
inform the operator.
u
Do not continue to use instruments that are damaged.
2.7.2
Hot surfaces
The column oven area and the heating elements of the device can become hot. If
touched they can cause skin burns.
u
Do not touch hot surfaces or else wear suitable protective gloves.
2.7.3
Dangerous vapors
The use of the instrument can produce dangerous vapors that are capable of causing
life-threatening toxic effects.
u
Do not inhale any vapors produced during processing.
u
Ensure that vapors are removed by a suitable fume hood.
u
Only use the instrument in well ventilated areas.
u
If vapors escape from connections, check the ferrules an fittings concerned and
replace them if necessary.
u
Do not process any unknown fluids.
u
Observe the safety data sheets for all substances used.
2.7.4
Dangerous particles
The use of the instrument can produce dangerous particles that can cause life-
threatening toxic effects.
u
Do not inhale any particles produced during processing.
u
Ensure that particles are removed by a suitable fume hood.
u
Only use the instrument in well ventilated areas.
u
If particles escape from connections, check the ferrules an fittings concerned and
replace them if necessary.
u
Do not process any unknown fluids or solvent mixtures.
u
Observe the safety data sheets for all substances used.
2.7.5
Glass breakage
Broken glass can cause severe cuts.
Damaged glass components may implode if subjected to high pressure.
Minor damage to the ground joints impairs the sealing effect and may therefore
diminish performance.
u
Handle the flask and other glass components carefully and do not drop them.
u
Always visually inspect glass components for damage every time they are to be
used.
u
Do not continue to use glass components that are damaged.
u
Always wear protective gloves when disposing of broken glass.
2.7.6
Malfunction of a connected instrument (option)
A malfunction on a connected instrument can cause poisoning or death.
