manualshive.com logo in svg

Buchi Rotavapor R-300, Operation Manual, Page: 87 / 116

Share
Download
Buchi Rotavapor R-300 Operation Manual Download Page 87

BÜCHI Labortechnik AG

Appendix | 10

Operation Manual Rotavapor® R-300

87/116

10.2.8

Glass apparatus HP

023875
023900

028096

003275

11061985

11062186
(NS 29/32)

11069167

11062387

048180

005222

11066561

P+G 11066562

040627

000646

040625

Fig. 59: Glass apparatus HP

10.2.9

Accessories

Heating baths

Order no.

Image

Heating Bath B-301, 110V, not incl. Base B-300

For up to 1 Liter evaporating flasks. For temperatures
up to 95°C. Meant to be used with water as heating
media.

11B301002

Heating Bath B-301, 230V, not incl. Base B-300

For up to 1 Liter evaporating flasks. For temperatures
up to 95 °C. Meant to be used with water as heating
media.

11B301001

Heating Bath B-301, 110V, incl. Base B-300

For up to 1 Liter evaporating flasks. For temperatures
up to 95 °C. Meant to be used with water as heating
media.

11B301102

Heating Bath B-301, 230V, incl. Base B-300

For up to 1 Liter evaporating flasks. For temperatures
up to 95 °C. Meant to be used with water as heating
media.

11B301101

Summary of Contents for Rotavapor R-300





















































































































Reviews:

No comments