Buchi Rotavapor R-300 Operation Manual Download Page 38

Page: 38 / 116

5 | Installation

BÜCHI Labortechnik AG

38/116

Operation Manual Rotavapor® R-300

Secure the protection shield by inserting the pin supplied in the hole for the
mounting bracket.

Adjust the position of the protection shield to the desired angle by pressing the
button on the handle (2).

5.15

Fit the splash guard (optional accessory)

When closed, the splash guard protects against splashes of heating fluid.

NOTE

Use the splash guard with the heating bath B-305.

NOTE

Only suitable for heating bath temperatures up to 160°C.

NOTE

All tools and screws are included in the splash guard specifications supplied.

Switch the Rotavapor

On/Off

master switch to Off.

Switch the heating bath

On/Off

master switch to Off.

Fig. 19: Removing the screws on the rear panel

Remove the screws on the rear panel of the Rotavapor.

Summary of Contents for Rotavapor R-300





















































































































Search results

Summary of Contents for Rotavapor R-300

Reviews:

Related manuals for Rotavapor R-300

Brands by name

Popular brands

Buchi Rotavapor R-300, Operation Manual

Search results

Summary of Contents for Rotavapor R-300

Reviews:

Related manuals for Rotavapor R-300

Brands by name

Popular brands