BÜCHI Labortechnik AG
Installation | 5
Operation Manual Rotavapor® R-100
25/60
5.6
Electrical connections
u
Make sure that the available power supply matches the rating indicated on the
type plate.
u
Plug the rotary drive unit connecting lead into the socket (2) on the heating bath.
u
Plug the power cord into the socket (1) on the heating bath and then into a mains
power socket.
u
If an extension lead is required, make sure that it is earthed and has a suitable
power rating.
5.7
Overview of connections
The diagram below shows the connection of tubing and electrical leads in a typical
application of the Rotavapor® R-100 in conjunction with a Recirculating Chiller F-105,
a Vacuum Pump V-100, an Interface I-100 and a Woulff bottle (see also Chap-
ter 3.2.4 "Typical application", page 14).
IN
OUT
The connections to the Recirculating Chiller F-105, the Vacuum Pump V-100 and the
Interface I-100 are described in the particular operating instructions in each case.
Summary of Contents for Rotavapor R-100
Page 1: ...Rotavapor R 100 Operation Manual 11593663E en...
Page 59: ......
