Buchi Nano B-90, Operation Manual

Page: 64 / 104

6 Operation
64
B-90 Operation Manual, Version B
3 — Pump rotation direction alternates every 3 seconds
4 — Pump rotation direction alternates every 6 seconds
Spray selection
Select a spray head output between 0 % and 100 % spray rate. This directly effects the throughput of
the spray head.
Temperature selection
Set the drying gas inlet temperature between 0 °C to 120 °C.
NOTE
The lowest possible drying gas inlet temperature in ‘open loop’ mode depends on the local room
temperature.
6.3 Menu structure overview
The table below shows all Nano Spray Dryer B-90 menus available from “Standard view” to “Sub–
Menu 3”.
Basic state
Pump
Spray
Temp.
Menu Configuration
View Parameters
Info
Gas Mode
Units
LCD-Contrast
Sea Level
Rot Release
Key Sound
Language
Temperature
Volumeflow
Pressure
Standard view
Sub–Menu 1
Sub–Menu 2 Sub–Menu 3
Calibration
Air
~4 % O
2
~1 % O
2