5 Putting into operation
K-375 / K-376 / K-377
Operation Manual, Version E
52
The bottle containing the titration solution can be fixed
on the right side of the device using the provided strap
1
.
The buret (consisting of the dosing unit and the
corresponding drive unit) is mounted on the bottle.
Fig. 5.9: Buret mounted on the titration solution
bottle
The cable of the driving motor is guided through a cut-out in the housing at the rear side of the K-375
and must be connected to port “Acid” (see chapter 5.2.1).
Fig. 5.10: Guidance of the cable through the cut-out
Fig. 5.11: Connection of the cable of the driving motor
The cable of an additional dosing unit for back titration can also be guided through the same cut-outs
in the housing.
NOTE
In case the buret gets blocked, refer to chapter 7.7.6 “Troubleshooting the dosing unit”. The
assembly of the dosing unit is explained in detail in the separate operating instructions delivered
together with the dosing unit.
