7 | Description of the interface pro
Büchi Labortechnik AG
50/106
Operation Manual K-365 Dist Line
Network submenu
Action
Option
Explanation
[Network]
Enter value
The following parameters can be
edited:
Device name/DHCP/MAC address/
System IP address/Subnet mask/
Gateway
Service submenu
NOTE
Only super user can carry out changes in the
[Service]
submenu.
System Information submenu
Technical information about the connected devices (e.g. serial number, firmware
version).
7.3.5
Determination data menu
Shows the history of the determination data.
7.4
Status bar interface pro
The status bar shows actual information about the instrument.
View
Status
The instrument is in standby mode.
Process is running.
The instrument is heating up.
The BLE dongle is connected to the instrument.
A level detection sensor is connected to the in-
strument.
Reaction detection sensor attached.
A tank level sensor is connected to the instru-
ment.
Dosing unit attached.
Titration unit attached.
SD
White: A SD card is in the instrument.
Red: The SD card in the instrument is in read only
mode.
A USB input device is connected.
USB
A USB memory stick is connected to the instru-
ment.
