8 | Editing a method
BÜCHI Labortechnik AG
54/88
Operation Manual FatExtractor E-500
8
Editing a method
This chapter describes how to edit a method.
NOTE
Depending on the extraction method you edit, the display shows the available param-
eters for this extraction method.
8.1
Creating a new method
Navigation path
➔
u
Navigate to the
[Method]
menu via the navigation path.
u
Select the submenu
[Define method]
with the navigation control.
ð
The display highlights the selection in green.
u
Tap the function
[OK]
on the function bar.
ð
The new method is created.
ð
The display shows the view
Method
.
u
Tap the function
[Save]
on the function bar.
ð
The method is saved.
8.2
Changing the name of a method
Navigation path
➔
u
Navigate to the
[Method]
menu via the navigation path.
u
Tap the name of the method that you wish to edit.
ð
The display shows the view
Method
.
u
Tap the function
[Edit]
on the function bar.
u
Select the action
[Method name]
with the navigation control.
ð
The display shows a dialog with an alphanumeric input box.
u
Enter a name for the method.
u
Tap the function
[Save]
on the function bar.
ð
The new name is saved.
ð
The dialog box closes.
8.3
Setting the solvent of a method
The following solvents are selectable:
Chloroform
Diethyl ether
Hexane
Petroleum ether
Own created
The control sets the heating level for the selected solvent automatically.
