background image

BÜCHI Labortechnik AG

Operating the interface pro | 7

Operation Manual FatExtractor E-500

49/88

7.2

Function bar

The function bar shows available functions according to the current operation.

The functions on the function bar are executed by tapping the relevant function but-
tons.

Symbol

Description

Meaning

[Back]

The display reverts to the previous
view.

O K

[Confirm]

Confirms an entry.

S AV E

[Save]

Saves the setting.

M E N U

[Menu]

Allows selection of a menu from the
menu bar using the navigation con-
trol.

S TA R T

[Start]

Starts the extraction process.

STOP

[Stop]

Aborts extraction on all extraction
positions.

QR Code

[QR Code]

The display shows a QR Code which
contains the data of all extraction pa-
rameters.

U P

[Up]

The lift moves up.

D O W N

[Down]

The lift moves down.

E S C

[Escape]

Cancels the actual entry.

C O P Y

[Copy]

Copies the selected method.

7.3

Menu bar

The menus are represented by symbols on the menu bar. Navigation through the
menus is by input controls.

The following menus are available:

Menu symbol

Meaning

Submenu/Actions

[Home]

 menu

—

Process control param-
eters

[Method]

 menu

—

Editing and saving ex-
traction methods

[Configuration]

 menu

—

Change settings

—

Service menu

—

System information

Summary of Contents for FatExtractor E-500

























































































Reviews: