Buchi DuMaster D-480, Operation Manual, Page: 77 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 77
Creating new sections
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Creating new sections
Proceed as follows:

Open the "Device configuration" dialog by selecting
Options > Configuration
.

Select the tab for which you want to create a new section.

Enter the name of the new section in the "Section" dropdown listbox and click
New Section
to
the right of it. The "Comment modification" dialog is displayed:

Enter a justification in the "Comment modification" dialog and click
Close
.

Click
Insert
in the dialog "Device configuration" to insert an entry into the section just created.
The "Configure key value" dialog is displayed:

Enter your values in the "Key" and "Value" fields and click
OK
. The "Comment modification"
dialog is displayed.

Enter a justification in the "Comment modification" dialog and click
Close
.

Click
OK
in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.

Click
OK
and quit the operating software.

Restart the operating software as required.