Buchi DuMaster D-480, Operation Manual

Page: 74 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 74
Installing and updating the software
Conditions for installation
In order to install the software correctly, administrator rights for the PC must be available.
Requirements for operation
Do the following to be able to operate the software without any problems:

On the PC where the software is installed, check power management settings under
Control
Panel > Power Management
or under
Control Panel > Power Options
. The following options
must be set to "Never":

"Turn off monitor"

"Turn off hard disks"

"System stand by"

"System hibernates"

Power management must also be disabled in the PC's BIOS.
The PC on which the software is installed must not be overloaded with other software. This could
cause unstable operation of the software.
Installing and updating the software
Proceed as follows:

Insert the enclosed CD/DVD in the CD/DVD-ROM drive. The CD/DVD usually starts
automatically.

If the CD/DVD does not start automatically, start it by running
setup.exe
on the CD/DVD.

Select the desired language.

The installation wizard is displayed. Click
Next
and follow the steps of the installation wizard.