Buchi DuMaster D-480, Operation Manual

Page: 263 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
10 - Menu and dialog descriptions 263

Optimizing data evaluation
(on page 99).
Print (Dialog)
Function
In this dialog you can define print settings. The appearance of this dialog depends on the type of
printer installed / activated. It is usually used to define the following:

the number of copies to print,

the print format, and

print quality.
Open
Open the dialog via:
Menu command Button Hot key
File > Print
CTRL + P
First the "Configure report" dialog is displayed, in which you can select the headers and type of
printing, before the "Print" dialog is displayed.
Elements
The following describes the elements of the dialog.
In section "Printer":
Label Element type Meaning
Name Dropdown listbox Field displaying a list of printers connected to the
computer.
Properties
Button Opens a dialog in which you can define the properties of
the printer selected on the left in the "Name" field.
Status Label Displays the status of the selected printer.
Type Label Displays the type of the selected printer.
Location Label Displays the location of the selected printer.
Comment Label Displays a comment on the printer.
Print to file Checkbox The print output is sent to a file instead of to a printer.
Note:
Use the Windows control panel to install printers and configure printer connections.
In section "Print range":
Label Element type Meaning
All Radiobutton Prints all pages.
Pages from ... to Radiobutton Prints a certain range. You can define the start and end
pages in the textbox next to this button.
Selection Radiobutton Prints the selection only.
In section "Copies":
Label Element type Meaning
Number of copies Textbox with buttons Field to input the number of copies to print.
Sort
Checkbox Prints multiple complete copies of a document
successively.