25
Glass Oven
B-585
5.6.4 From Kugelrohr configuration to drying
configuration
Converting from ball tube distillation to drying is done by fol-
lowing the instructions in Chapter 5.3.2 in the opposite order.
To find out how to operate the drying oven, see Chapter 5.3.
5 Operation
Fig. 26d: Drive unit with sleeves positioned
Fig. 26e: Cooling device
Fig. 26f: Socket for plug in the drive unit
2
7
1
3
4
5
6
·
To install the drive unit, remove the connection (2) at the
end of the rods (1), insert the rods into the openings (3)
on the glass oven. Fix up the connection (2) again on
the rods.
·
The cooling plate assembly (4) is fastened to the open-
ings (5) in the support frame
The connection cable (7) for the drive unit has to be plugged
into the lower plug socket (6) on the left side of the instru-
ment (drive).
