btsr SMART CLEARER, Operating Manual

Page: 24 / 81

Operation
- 3.12 - SMART CLEARER
Operating Sequences
The SMART CLEARER system allows the following set of functions to be
carried out:
Univocal identification of each sensor by means of an automatic numbering
procedure.
Programming, modifying, controlling and saving the values related to the
different articles, by means of a database which can manage up to 40
different articles.
!
Monitoring of the machine operations by signalling and storing the technical
faults
(if any) found by the sensors.
"
Article loading/unloading (i.e. the settings related to the articles) into the
connected sensors.
#
Title reading (yarn diameter) currently detected by each sensor.
The main menu of the system (P1) includes four items:
SETUP:
allows the completion of tasks and
CONTROL:
allows the activation of control mode
!
WORK:
allows the completion of tasks
"
READ:
allows the completion of tasks
#
The following five operating sequences show how to activate the four items of the
main menu and how to choose the desired function within each item.
The following pages will describe in detail each task, providing all the necessary
information to correctly perform the tasks themselves.
ONLY FOR AUTOMATIC MODE
To ensure a correct operation of the SMART CLEARER system, after the
required programming/administration functions (SETUP, WORK, READ) you
will have to activate and keep active the CONTROL mode.
To exit the CONTROL mode, press and hold for 3 seconds the Reset button
and, if programmed during the Setup, type the password.
In this way, possible undesired CONTROL mode de-activations will be
avoided.