manualshive.com logo in svg

bto x-book 17cl46, User Manual

Share
Download
bto x-book 17cl46 User Manual Download Page 278

Video Driver Controls

C - 12 HDMI Audio Configuration

C

HDMI Audio Configuration

HDMI (High-Definition Multimedia Interface) carries both 

audio

 and video signals.

In some cases it will be necessary to go to the 

Sound

 control panel and manually

configure the HDMI audio output as per the instructions below.

1.

Click 

Start

, and click 

Control Panel

 (or point to 

Settings

 and click 

Control Panel

).

2.

Click 

Sound

 

 (

Hardware and Sound

) and click 

Playback

 (tab)

3.

Depending on your display, the playback device may be selected, however in some 
cases you may need to select the audio device and click 

Set Default

 

(button).

4.

Double-click the device to access

 

the control panel tabs illustrated overleaf.

Volume Indicator

Click the taskbar volume
indicator  

when 

an

HDMI device is select-
ed, and you will note that
the icon at the top of the
volume level indicator
has changed.

Figure C - 9

Sound - HDMI 

Device (set Default)

Summary of Contents for x-book 17cl46





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands