bto x-book 17cl46 User Manual Download

Page: 245 / 308

Troubleshooting

Problems & Possible Solutions 8 - 13

The computer is off (or in
Sleep Mode) but
powered by the AC/DC
adapter plugged in to a
working outlet, or by
battery with a capacity
above 20%.

I have

plugged a device into
the powered USB port

in order to charge it, but

the device is not
charging

The port is not powered on.

Toggle power to the port using the

Fn + power button

combination

This function may not work with certain external USB compliant devices (check your device’s doc-
umentation).

If this is the case,

power the computer on and connect the external USB device

in order to charge it.

Note

that this function is designed to help

charge USB compliant devices

, but is

not designed

to allow their operation

Problem

Possible Cause - Solution

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands