bto x-book 17cl46 User Manual Download

Page: 208 / 308

Modules

7 - 70 Bluetooth Module

3rd Party Bluetooth (V4.0) Combo Driver Version 2 Installation

Note this driver is only required for the 3rd Party combo Bluetooth and WLAN
module version 2 (Bluetooth V4.0).

Before installing the driver make sure the Bluetooth module is powered

(use

Fn + F12

key combination), then insert the

Device Drivers & Utili-

ties + User’s Manual

disc into the CD/DVD drive. If a

Found New Hard-

ware

window appears, click

Cancel

in all windows that appear, and then

proceed to install the driver as below.

Click

Option Drivers

(button).

3. Click

5.Install Combo BT Driver > Yes

4. Click

Next

(if a prompt appears to ask you to turn the Bluetooth power on,

press the

Fn + F12

key combination to do so, otherwise the driver will not

be installed).

5. Click

Finish

to restart the computer.

6. See

“Standard Bluetooth Configuration in Windows 7” on page 7 - 72

for

configuration instructions.

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands