bto x-book 17cl46 User Manual Download

Page: 132 / 308

Upgrading The Computer

6 - 14 Upgrading the Hard Disk Drive(s)

Removing the Hard Disk from the Secondary HDD Bay (Model A/B)

Note that the

secondary

hard disk module is used to replace the optical device mod-

ule (CD/DVD) in

Model A & B

computers.

Turn the computer off, remove the AC/DC adapter, turn it over and remove the bat-
tery.

Locate the hard disk bay cover and remove screws

Remove the hard disk bay cover

Remove the screw at point

, and use a screwdriver to carefully push out the

secondary HDD module at point

Figure 6 - 12

HDD Bay Cover

Removal &

Secondary HDD

Removal

(Model A/B)

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands