bto x-book 17cl46 User Manual Download

Page: 109 / 308

BIOS Utilities

Main Menu 5 - 7

SATA Port # (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of a optical Device/

HDD on the computer’s SATA Ports.

System/Extended Memory (Main Menu)

This item contains information on the system memory, and is not user configurable.
The system will auto detect the amount of memory installed.

MB Series / BIOS Revision / KBC/EC firmware Revision / VGA Card (Main
Menu)

This item contains information on the BIOS version and video card etc., and is not
user configurable.

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands