Bticino Sfera video kit, User And Installation Manual

Page: 16 / 30

16
Sfera Proximity Reader
User and installation manual
Pass.
2
Manager
master
1
Passepartout badge
To access the programming of a “
Passepartout
” badge, a master badge is necessary. Up to 100
passepartout badges may be saved.
The proximity reader will confirm that the badge has been accepted by means of audible
signals and the switching on of the green LED. The transmission of an unrecognised badge, or a
programming error (e.g. memory full or badge already used), will cause the interruption of the
programming procedure. This interruption is confirmed by a long beep and the red LED coming on.
2. Move a new
passepartout key card
close to the reader for registration.
The flashing of the green LED and a short beep confirm that the
passepartout badge
has been
saved.
1. Move the system management key card close to the reader; the reader emits a short beep
and the green LED starts flashing. The programming procedure starts.
New passepartout badge