Bticino Sfera 352500, User And Installation Manual

Page: 29 / 36

29 28
Sfera Display Module
User and installation manual
Address book
Apartment
10
11
12
0 1 1 1 0 .
Modify
1
Modify
Block Floor Apart.
0 1 1 1 0 .
2
Modify
door lock code
1234
3
Modify
address
0001
4
Modify
Repeat
Confirm
Cancel
5
Sort
Address book
Modify
1 After selecting the Block, Floor and Apartment of the contact to modify.
Press
OK
to access the menu.
2 Change the setting using the keys or the keypad module (if present).
Confirm by pressing and releasing
OK
, or if no changes are required for the field, press and
hold down
OK
to go to the next field.
Both the keys and the Keypad module can be used to enter the numerical codes for the
door lock opening.
3 Press and hold down
OK
to move to the next field.
4 Set the SCS physical address of the internal unit
Press and hold down
OK
to end the contact modification.
5 Select Confirm and pressi
OK
To end the contact modification procedure without saving the data, select
Cancel
and press
OK