11
10
Thermostat with display
Installer manual
4 Configuration
4.1 Physical or advanced configuration
Depending on personal requirements and the type of system to install, the thermostat may be
configured in two ways: physical or advanced configuration.
The physical configuration is completed by connecting the configurators to the appropriate sock-
ets on the back of the thermostat.
If no physical configurators are connected, the device can be configured virtually by connecting it
to a PC and using the dedicated MyHOME_Suite software.
In this way it is possible to simplify the configuration operations in large systems, without the need
to manually intervene on each device.
The advanced configuration offers more functions, including being able to control several ac-
tuators with just one thermostat and being able to configure the automatic switching mode
(heating/cooling).
For the configuration see the product technical sheet.