Entrance Panel keyboard 4.3"
User and installation manual
32
Access using Access Code
Using this function it is possible to access the building by typing an Access code.
The Access Code is set in the
Installation\Access code\Local
section
1. Touch to enter the code
2. Enter the local access code (default 111111) or the personal access code or panic code
3. Touch to confirm
1
2
3
2
Note
: for safety reasons, modify the code.
Personal access code opens the last EP of my community, i.e. the EP closest to the apartment,
chosen from those to which I have access.
Example: if they are enabled to all the accesses (complete Area/Building/Riser/Floor/Apartment
structure) I open the Apartment EP.
This code does not work on community/area/building EPs
Panic access code: opens the door and at the same time sends an alarm message to the guard
station.
Example: if a criminal forces me to forcibly open the door
The local access code opens community EPs, with the exception of apartment SEPs and EPs
Note
: for safety reasons, modify the code.
Note
: to activate the code, there must be a resident associated with the apartment in the SW (see SW
manual)
Summary of Contents for 374001/03
