BTEK T419S, Service Manual

Page: 110 / 136

110 T419S Indicator Service Manual
11.5 Network tokens
Token
SMA protocol PLC Protocol Description of Network Token Data Type Notes
Set XVS Get XVG Inbound Outbound INTEGER FLOAT STRING
0 Disabled
1 X X Gross Weight Value X
2 X X X X Tare Weight Value X
3 X X Net Weight Value X
4 X X Scale Motion / Weigher Steady Flag X
0 = Motion on Scale / Unsteady Weight
1 = No Motion on Scale / Steady Weight
6 X X Scale Overload Flag X
0 = Scale is NOT Overloaded
1 = Scale is Overloaded
7 X X Scale Underload Flag X
0 = Scale is NOT Underloaded
1 = Scale is Underloaded
8 X X Scale Center of Zero / Zero Balance X
0 = Scale is NOT at Center of Zero / Zero Balanced
1 = Scale is at Center of Zero / Zero Balanced
9 X X X X Active Unit of Measure X
0 = lb
1 = kg
2 = oz
3 = g
4 = lb-oz
5 = Custom Unit #1
6 = Custom Unit #2
7 = Custom Unit #3
8 = Custom Unit #4
10 X X Peak Max Weight Value X
11 X X Peak Min Weight Value X
12 X X Count Value X
13 X X X X Piece Weight Value X
18 X X Rate of Change X
37 X In-Motion X
43 X X ADC Counts X
47 X X Percent X
48 X X Target X
49 X X Gross Total Plus Current X
50 X X Gross Total Minus Current X
51 X X Net Total Plus Current X
52 X X Net Total Minus Current X
53 X X Count Total Plus Current X
54 X X Count Total Minus Current X
55 X X Gross Average X
56 X X Net Average X
57 X X Count Average X
58 X X Net Max X
59 X X Net Min X
60 X Freefall 1 X