Page | 8
Connecting the Display to a Computer for
Configuration Purposes
WagSet RM (Windows Operating System only)
WagSet RM: WagSet RM Software Download
Before configuring the display from WagSet RM, connect it to a computer via Ethernet or
RS232. When using RS232, connect to the port of the computer as shown in fig. 3. See
“Remote Display Connections” for location of the RA and RK connections.
Select “B-TEK Serial String” then Set
Port settings can be changed under Basic. If using ethernet to transmit your serial string, go to
Custom settings to set your indicator’s IP address.
To display alpha characters, download one of the configuration files on page 3 of this manual, or
select one of the B-TEK strings in configuration. Open the file, then select the measurement
result tab, then select
“display” under “Display every character in the result area”. Send
configuration to the display. In your weight data stream, characters 3 thru 9 (same as weight
digits) can be used to display messages on the display.
BT-470
