AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
41
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
6.4.
Wi-Fi Network Connection
Configuring PC to connect to Wireless Access Point
1.
Disconnect the Ethernet cable from Wi-Fi Wireless Access Point POE/power supply.
2.
Connect a patch cord ethernet cable from Wi Fi Wireless Access Point POE/Power supply
to the Ethernet port on the PC.
3.
On the laptop, open File Explorer. This can be accomplished by left clicking on taskbar
icon or entering “File Explorer” in the search bar.
4.
Enter “Control Panel
\All Control Panel Items\
Network and Sharing Center” into
the
address bar in File explorer.
5.
In the “Network and Sharing Center” page, left click on the “Ethernet” link as circled in
red below:
6.
In the “Ethernet Status” window, left click on the “Properties” button as shown below
(circled in red):
INSTALLATION
