AC Level 2 Charger
INSTALLATION AND USER’S MANUAL
Page
24
of
59
This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
09-Mar-20
Revision
T
6.1.2.
Single or Dual Wall Mount Charger Mounting
WARNING
Make sure to provide adequate structural strength for this charger to prevent any serious
personal injury or damage to equipment. It is the responsibility of the installer to ensure that the
structure to where this charger is mounted can support five (5) times the combined weight of
the entire charger unit.
Mounting procedures for Single or Dual Wall Mount Charger are outlines as follows:
1.
Take out the charger from its packaging.
2.
Usin
g the key (shipped together on the same packaging), open the charger’s door to
expose the four (4) mounting holes.
3.
Mount and secure the charger’s rear hold bracket.
INSTALLATION
