Wireless Keyboard & USB dongle /9039ARF III / BTC /
EMPREX
Quick Installation Guide
Hardware Installation
1. Plug the dongle receiver connector into your available USB port on PC.
2.
Make sure the batteries of the keyboard are installed correctly. Please follow
the polarity signs in the battery compartment.
Note:
After you plug the receiver USB connector into your PC USB port, please
hold the keyboard close to the receiver within 1m and press any key to pair
ID.
ID Pairing Procedure
If it can’t work, please follow the steps below to process the ID pairing procedures.
The ID-recognition function helps to protect against interference from other RF
products. Remember to follow the steps below to change ID when other RF
products affect your keyboard kit.
ID pairing/connect button location:
-
Receiver ID pairing/connect button
→
on the top of the
dongle receiver
-
Keyboard ID pairing/connect button
→
on the bottom of the
keyboard
ID pairing procedures:
1.
Press and hold the ID pairing/connect button on the top of the dongle
receiver about
5
seconds until the receiver LED flashes. The receiver LED will
flash 60 seconds to wait for keyboard pairing information.
(If you release the
button within
5 seconds, the ID doesn’t make any changes.)
2.
Hold the keyboard close to the dongle receiver within
1M.
3.
Press and hold the keyboard ID pairing/connect button on the bottom of the
keyboard about
5
seconds until the keyboard LED flashes.
(If you release the
button within 5 seconds, the ID pairing will fail.)
4.
The receiver LED indicator flashes rapidly as its ID paired with this keyboard.
Then you could press any key to check if the keyboard works or not.
Note:
-
The whole ID pairing procedure shall be completed within
60
seconds.
-
Make sure your PC is on and running when doing the
pairing procedure.
-
You don’t have to pair ID again after changing batteries. If it
can’t work, please follow the steps above to pair ID.
-
The keyboard can operate freely up to a radius of about
10m from the receiver.
-
The keyboard battery life is up to 4.5 months.
Front View of
Back View of
Power Button
ID LED/
Battery Low
ID Button
ID pairing/connect button on the top of the
ID Button
Keyboard Hotkey Functions (from left to right)
ID pairing/connect button on the bottom of the keyboard
1.
MCE Start
Button
To quickly launch Media Center
9.
Back
Go to the previous screen.
2.
Mouse
Painter
Built-in mouse painter and Left/Right click.
10.
More
Show information about the selected
item.
11. Record
Record the TV Show to disk.
3.
Live TV
Switch to Live TV to bring up Live TV on
your computer screen or on a television
connected to your Media Center PC.
12. Play
Play the selected song, album, play
list, recorded TV Show, or video.
4.
Guide
Go to the electronic programming guide.
13.
Pause
Pause the currently playing media.
Press pause again to resume.
5.
DVD
Menu
Display the DVD menu
14.
Stop
Stop the currently playing media.
Press play to start the track again from
the beginning.
6.
Volume -
Adjust the volume
15. Rew/Fwd
Rewind/ Speed up the currently playing
media.
7.
Adjust the volume
16. Replay
Rewind the position pointer and
