BTBP CLARITY Mini 3D User Manual Download Page 12

Page: 12 / 201

BrighTex Bio-Photonics, LLC

Confidential

USB Cable

Power Cord

2.2 Setting up the System-Device Connections

Place the BTBP Clarity

Mini 3D photography system on the adjustable table supplied with an adjustable

stool for your clients.

Locate the ON/OFF switch at the back side of photography system and make sure the power switch is OFF.

Insert the USB cable shipped with the unit into the USB connector on the back of the Mini 3D capture

system.

Insert the male end of the USB cable into the USB connector and AC Power Cord at the back of the Capture

Unit.

5. Connect the other end of the AC power cord to a grounded power source. A surge suppressor is

recommended, to protect the computer from voltage spikes that might damage it.

Summary of Contents for CLARITY Mini 3D










































































































































































































Search results

Summary of Contents for CLARITY Mini 3D

Reviews:

Related manuals for CLARITY Mini 3D

Brands by name

Popular brands

BTBP CLARITY Mini 3D, User Manual

Search results

Summary of Contents for CLARITY Mini 3D

Reviews:

Related manuals for CLARITY Mini 3D

Brands by name

Popular brands