manualshive.com logo in svg

BT Versatility, Manual

Share
Download
BT Versatility Manual Download Page 29

BT Versatility 
Owner's Manual

 

 

29

Programming and dialling speed dial numbers 

If you have a standard telephone, you can programme up to thirty Personal Speed Dial numbers. 

To programme a Personal Speed Dial number 

• 

Lift the handset, or press the Hands-free Key, if available. 

• 

Dial the code 75. 

• 

Enter the location (01 - 30) where you want to store the number. 

• 

Dial the number you want to store. 

• 

Go on-hook. 

Note: The line access codes 'e.g. 9' is not required 

To dial a Personal Speed Dial number 

• 

Lift the handset, or press the Hands-free Key, if available. 

• 

Dial the code 74. 

• 

Dial the location (01 - 30) of the number you wish to access.  The number is automatically 

dialled. 

To dial a System Speed Dial number 

• 

Dial the location code (8001 – 8500) of the number you wish to access.  The number is 
automatically dialled. 

Summary of Contents for Versatility































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands