BT SYNERGY 3505 Page 55 User Manual Download

Page: 55 / 72

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

Internal calls

If you have more than one handset registered to the
base, you can make internal calls between handsets.

1. Press

and enter the handset number you want to

call, (1-5).

The receiving handset rings and the display shows

INT

and the number of the handset calling.

2. Press

to end the call.

Transferring calls

You can transfer an external call to another handset
registered to the base.

During an external call:

1. Press

then the number of the handset you want

(1-5).

The caller is put on hold.

2. When the other handset answers you can talk to them

and press

to transfer the call.

If the other handset does not answer, press

to speak

to your caller again.

Int

Additional handsets & bases

5675 BT Synergy 3505 UG [4] 11/11/03 4:16 PM Page 55

Summary of Contents for SYNERGY 3505









































































Search results

Summary of Contents for SYNERGY 3505

Reviews:

Related manuals for SYNERGY 3505

Brands by name

Popular brands

BT SYNERGY 3505, User Manual

Search results

Summary of Contents for SYNERGY 3505

Reviews:

Related manuals for SYNERGY 3505

Brands by name

Popular brands