3 – 2
Repair manual
SWE100, 120, 120L, 120S, 140, 140L, 200D
© BT
General safety rules
Electrical system
T code
Valid from serial no.
Date
Order no.
841×842×843
6061850-
2012-08-30
258946-120
3.2 Electrical system
When working on the electrical system of the truck, remember the
following:
•
a short circuit may occur if metal objects come into contact with live
electrical connections. This can result in burns. Remove watches,
rings and other metal jewellery before starting work.
•
always use insulated tools while working on the electrical system.
•
always switch off the truck's power supply before opening the hoods
to the drive assembly and the electrical system.
•
disconnect the battery when using electric welding equipment. The
welding current can enter and damage the battery.
•
always remove the battery plug when carrying out maintenance on
the truck, unless the instructions in this repair manual state
otherwise.
•
blow electric motors clean using compressed air.
•
clean electrical panels, PCBs, contactors, contacts, magnetic
valves, etc., with a moist cloth and a cleaning agent.
Note!
Risk of short circuit that may damage electrical components.
Do not break the warranty seal on the PCBs.
https://www.besttruckmanuals.com/
