Load up to
Make sure
1 0 e nve l o p e s
• The print side is facing you and the paper guide is
adjusted against theside of the envelopes.
• The stamp location is in the upper left corner.
• The envelopes are loaded
ve r t i c a l l y
against the righ side of the rear input tray.
1 0 g r e e t i n g c a r d s ,
• The print side is facing you and the paper guide is adjusted against the side of the cards.
i n d ex c a r d s , p o s t -
• The cards are loaded
ve r t i c a l l y
against the right side of the sheet feeder.
c a r d s , o r p h o t o c a r d s
2 5 s h e e t s o f p h o t o
• The glossy or coated side is facing you.
p a p e r o r p h o t o c a r d s
• The paper guide is against the side of the paper.
2 0 s h e e t s o f
• Place the banner paper behind the printer.
b a n n e r p a p e r
Then bring the unattached edge of the first page over the
Note: Make sure you select
printer and into the sheet feeder.
Banner or A4 Banner paper
• The paper guide is against the side of the paper.
size in the Printer Properties
1 0 t r a n s p a r e n c i e s
• The rough side of the transparency is facing you.
• The paper guide is against the edge of the transparencies.
1 0 0 s h e e t s o f
• The print side is facing you and the paper guide is against the side of the paper.
c u s t o m - s i ze d p a p e r
• Your paper size fits within these dimensions:
- Width: 3.0 in. to 8.5 in. (76 mm to 215.9 mm)
- Length: 5.0 in. to 17.0 in. (127 mm to 432 mm)
2 5 i r o n - o n t r a n s fe r s
• You load the iron-on transfers following the instructions on the package.
• The paper guide is against the side of the iron-on transfers
• Your BT MultiJet 3000 automatically prints a mirror image.
Pa p e r / E nve l o p e o p t i o n s
